SPYPOINT TINY - Manual (Page 25)

48 49
English
English
View Date/Time: To increase the view of the date and time
imprinted on the picture.
Protect: To protect the photo or video on the screen.
Erase one: To erase the photo or the video on the screen.
Format: To format memory card and to erase all
protected photos and videos.
Erase All: To erase all stored photos and videos,
with the exception of protected photos
and videos.
Exit: To return to viewing screen.
USB EXT
TV OUT
EXTERNAL TRIGGERING
Input which triggers the taking of photos or videos using a
normally open contact. (Example: using a magnetic door
switch connected to an alarm system).
DOWNLOAD TO A COMPUTER
To transfer or view photos and videos on a PC, you must first
turn off the camera and connect the USB cable (supplied)
from the camera to your computer. The computer will
recognize the camera and will install the software itself.
Click on “My Computer” and select “Removable Disk”.
Then click “DCIM” and “100DSCIM” to find all your photos
and videos.
Taking the SD card out of the camera and inserting it into
the computer port will achieve the same results. If no SD
slot is built into the computer, a multi-card reader RD25-1
(sold separately, refer to the section “OPTIONS”).
TELEVISION
To see photos and videos directly on a TV screen, turn
on your camera and connect the yellow end of the cable
(supplied) into the “VIDEO IN” of the TV and the other end
into the “TV OUT” of the camera. The last picture or video
recorded by your system will appear on the screen. To change
the picture or the video, use the key “” or “”. By pressing
“OK”, the following options will appear: