SPYPOINT TINY-W - Manual (Page 30)

56 57
English
English
DOWNLOAD TO A COMPUTER
To transfer or view photos and videos on a PC, you must first
turn off the camera and connect the USB cable (supplied)
from the camera to your computer. The computer will
recognize the camera and will install the software itself.
Click on “My Computer” and select “Removable Disk”.
Then click “DCIM” and “100DSCIM” to find all your photos
and videos.
Taking the SD card out of the camera and inserting it into
the computer port will achieve the same results. If no SD
slot is built into the computer, a multi-card reader RD25-1
(sold separately, refer to the section “OPTIONS”).
To upload or view photos stored in the Blackbox receiver,
proceed the same way using the SD memory card.
Note: The names of the images recorded by the TINY-W
camera starts by PICT while those stored in the receiver
starts by PICW.
VIEW
To view recorded photos or videos on TFT 2.4" viewing
camera screen or on a TV set at home.
• Viewing with the 2.4" screen: When camera is set to
“VIEW”, the last recorded photo or video recorded appears
on the screen automatically. Press “” or “” to view next or
previous images.
Press “OK” to view the different options available in
“VIEW” mode.
View Date/Time: To increase the view of the date and time
imprinted on the picture.
Protect: To protect the photo or video on the
screen.
Erase one: To erase the photo or the video on the
screen.
Format: To format memory card and to erase all
protected photos and videos.
Erase All: To erase all stored photos and videos,
with the exception of protected photos
and videos.
Exit: To return to viewing screen.
• Watching on TV: You can view the photos or videos
directly from TV. Connect the yellow end of the cable
supplied into the “VIDEO IN” of the TV and the other end
into the “TV OUT” of the camera. The last photo or video
recorded appears on the screen automatically. Press “” or
“” to view next or previous images. The options are the
same as when viewing on the 2.4" screen (see above).