SPYPOINT XCEL HD2 User Manual - Manual (Page 12)

12
Configuration modes
OPERATION OF THE LED LIGHTS AND SCREEN DEPENDING ON SELECTED OPTIONS
REMOTE
CONTROL
OPTION
DEL
LIGHTS
OPTION
OPERATION OF THE LED LIGHTS AND SCREEN
BEFORE RECORDING VIDEOS/PHOTOS
OPERATION OF THE LED LIGHTS AND SCREEN
WHEN RECORDING VIDEOS/PHOTOS
ENABLED
(
*
and
)
Enabled
( )
• The 4 LED lights flash every 2 seconds to indicate
that the camera is waiting for the signal from the
remote control (when the video, photo or time
lapse mode is shown on the screen).
• The screen turns off after 1 minute of inactivity
(ENERGY SAVING) . To return to the screen, press the
OK button.
Video/
Time lapse
• The 4 LED lights flash rapidly.
• The screen turns off after 5 seconds
(ENERGY SAVING).
Photo • The 4 LED lights flash rapidly.
Disabled
( )
• The LED on the back flashes every 2 seconds to
indicate that the camera is waiting for the signal
from the remote control (when the video, photo or
time lapse mode is shown on the screen).
• The screen turns off after 1 minute of inactivity
(ENERGY SAVING) . To return to the screen, press
the OK button.
Video/
Time lapse
• The LED light on the back flashes
rapidly.
• The screen turns off after 5 seconds.
(ENERGY SAVING) .
Photo
• The LED light on the back flash twice.
DISABLED
( )
Enabled
( )
• The camera turns off after 2 minutes of inactivity
(AUTO SHUT DOWN).
Video/
Time lapse
• The 4 LED lights flash rapidly.
• The screen turns off after 5 seconds
(ENERGY SAVING).
Photo • The 4 LED lights flash rapidly.
Disabled
( )
• The camera turns off after 2 minutes of inactivity
(AUTO SHUT DOWN).
Video/
Time lapse
• The LED light on the back flashes
rapidly.
• The screen turns off after 5 seconds
(ENERGY SAVING).
Photo • The LED light on the back flash twice.
*
See note on next page p.13
ENERGY
SAVING
ENERGY
SAVING
ENERGY
SAVING
ENERGY
SAVING
ENERGY
SAVING
ENERGY
SAVING
AUTO
SHUT
DOWN
AUTO
SHUT
DOWN