Operation modes – SPYPOINT XCEL HD2 User Manual User Manual

Page 8

Advertising
background image

8

Operation modes

DESCRIPTION OF ICONS

Turn on the device and switch from one mode to another by pressing the M

button. It is possible to see on the configuration screen 5 different modes.

VIDEO

HD video recording

(480p, 720p or 1080p)

PHOTO

Taking photos

• XCEL HD: 1mp, 3mp or 5 mp

XCEL HD2: 5mp, 8mp or 12mp

• 1 to 6 consecutive photos

TIME LAPSE

Taking photos at predefined regular

intervals

(0.5, 2, 5, 10, 30 or 60 seconds)

VIEW

• Allows the user to see the number of

recorded files.

• Allows the user to view videos and

photos when the camera is connected

to a television using the HDMI cable.

SETTINGS

Allows the user to set the advanced set-

tings of the camera.

See CONFIGURATION MODES section (p.11) for more details.

VIDEO MODE

• Allows the user to see the current configuration of the VIDEO mode.

1) Battery level

2) Video mode

3) Video resolution

4) Number of recorded videos

5) Remote control (wireless)

6) Zoom 1x to 4x (XCEL HD2 only)

7) Sound signal

8) LED lights

9) Estimated remaining recording time

• To start recording a video, press the button. The camera beeps if the

sound signal option is enabled. The recording time is displayed on the

screen and the LED lights flash while recording. See OPERATION OF THE

LED LIGHTS AND SCREEN DEPENDING ON SELECTED OPTIONS section

(p.12).

• To increase the zoom (XCEL HD2 only), press OK and to decrease, press

BACK. Refer to the subject distance table in the REMOTE CONTROL sec-

tion (p.15) to find which zoom level to use. The zoom adjustment can

be done while recording a video.

• To stop recording, press the button. The camera beeps if the sound

signal option is enabled. The remaining recording time on the memory

card will reappear on the screen.

When the microSD card is full, the camera automatically stops recording

and the current video will be saved.

When the battery is empty, the camera automatically stops recording and

the current video will be saved before the camera turns off.

It is possible to record a video with a maximum duration of approximately

45 minutes (3.66 GB) for the XCEL HD and approximately 30 minutes (3.66

GB) for the XCEL HD2. When this maximum is reached, the camera stops

recording and automatically starts a new video. The first video will be identi-

fied XCEL0001 and the second XC010001.

Note: It is possible to take videos with the camera installed upside down.

The camera automatically displays the video in the right direction when

viewing on a computer or a TV. To do this, the camera must be installed

upside down before recording the video.

1

2

3

4

6

7
8

9

5

Advertising
This manual is related to the following products: