SPYPOINT XCEL HD2 User Manual - Manual (Page 14)

14
Remote control • XCEL HD
When the camera is on and the REMOTE CONTROL option is
enabled, the remote control allows you to take videos and photos
in the mode shown on the screen by pressing the START/STOP
button. Wireless range up to 40 ft.
SYNCHRONIZATION
The remote control synchronizes automatically when the START/STOP
button is used to take a video or photo. It is also possible to use only one
remote control to control multiple cameras.
Examples:
• When only one camera is on, the remote control automatically
synchronises to this camera when the START/STOP button is used to
take a video or photo.
• If multiple cameras are on, the remote control automatically synchro-
nizes to each camera when the START/STOP button is used to take a
video or photo. This means that the remote control will start recording
or taking photos simultaneously on each of these cameras.
LITHIUM BUTTON BATTERY
The remote control must be powered by 2 lithium but-
ton batteries CR2032. Insert the batteries in the indicated
direction, the polarity of the battery must be respected
(+ upwards). DO NOT DISPOSE OF BATTERIES IN THE
GARBAGE.
ATTACHING THE REMOTE CONTROL
To attach the remote control using the Velcro strap
(included), just insert the Velcro strap into the slots on
each side of the back of the remote.
RECOMMENDATIONS
Do not submerge the remote control in the water.
