Summit FF1274 - Manual (Page 7)

 Select a suitable location for the refrigerator on a hard, even surface away
from direct sunlight or heat source, e.g., radiators, baseboard heaters,
cooking appliances, etc. Any floor unevenness should be corrected with
the leveling legs located on the front bottom corners of the refrigerator.
Door Alignment
Freezer Door: (see Fig. #1)
1. Remove hinge cover screw.
2. Remove the top hinge cover.
3. Loosen the top hinge screws using a Phillips head screwdriver.
Refrigerator Door: (see Fig. #2)
1. Loosen and remove the bottom hinge using a Phillips head screwdriver.
2. Adjust the door, or put a spacer between and then tighten the screws.
6