Summit FF1274 - Manual (Page 8)

Reversing the Door Swing
Left/right door opening method:
This appliance allows you to reverse the door opening from left to right and back.
You can select your preference of door opening by following the procedure to
make the change.
Dismantling:
1. Affix refrigerator and freezer doors by sticking adhesive tape on left and right
sides to hold doors in place.
2. As shown in Fig. #1, dismantle the hinge box cover on the upper part of the
freezer door with a Phillips head screwdriver. Then remove the three screws
from the hinge. Take out the hinge by pulling it vertically, and keep it in a safe
place.
3. Remove the adhesive tape on freezer door, left and take the door down, then
carefully put it aside.
4. Dismantle two screws of the central hinge, left and take down the central
hinge, and keep all pieces in a safe place. (see Fig. #3)
5. Remove the adhesive tape on refrigerator door, lift and take down refrigerator
door, and carefully put it aside.
6. Remove the door stoppers from the freezer and refrigerator doors and install
them on the opposite side of each door. (Not on all models)
7