Unisteer 8012380-01 Chevrolet C10 1973-87 - Manual (Page 9)

Page 9 657410
8. Once these are connected, fill the reservoir with fluid and turn the steering wheel left and right to
move fluid through the system. Double check the fluid and fill again. Before starting the car install the
alternator belt again and ensure both belts are tight. Once everything is tightened up, start the vehicle
and turn the wheel left and right to ensure that all air is removed from the system. Double check
everything to ensure everything is tight and nothing had come loose. We suggest to have to car
aligned after and ensure the jam nuts on the inner ends are tightened.
If you have any questions or problems regarding this product please contact:
UNISTEER®
Performance Products
1555 Enterprise Parkway
Twinsburg OH 44087
800-338-9080
WWW.UNISTEER.COM
Last Revised 8/20/2014
Copyright © 2014 by Maval Manufacturing Corporation All rights reserved.
No part of these materials can be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying, recording or by any information storage and retrieval
system, without permission in writing from Maval Manufacturing Corporation.