Barco R9001070 - Manual (Page 38)

Location and Functions of Control
5-4
Location and Functions of Control
5975696 BARCODATA 2100 140798
5975696 BARCODATA 2100 140798 5-4
Control Panel Terminology
a. Local Keypad
Getting access
The keypad is located behind a door, screened with
the name of the projector.
To open the door, push once on the indicated side
of the door and turn it to the right side of the
projector.
b. Remote Control
This remote control includes a battery powered infrared (IR) trans-
mitter that allows the user to control the projector remotely.
This remote control is used for source selection, control,
adaptation and set up. It includes automatic storing of :
- picture controls (Brightness, Sharpness...)
- settings
Other functions of the remote control are :
- switching between standby and operational mode.
- switching to "pause" (blanked picture, full power for immediate
restarting)
- direct access to all connected sources.
- variable adjustment speed : when pushing continuously on the
arrow keys or the picture keys, the adjustment will be executed
in an accelerated fashion.
Control Panel Terminology
a. Local Keypad
Getting access
The keypad is located behind a door, screened with
the name of the projector.
To open the door, push once on the indicated side
of the door and turn it to the right side of the
projector.
b. Remote Control
This remote control includes a battery powered infrared (IR) trans-
mitter that allows the user to control the projector remotely.
This remote control is used for source selection, control,
adaptation and set up. It includes automatic storing of :
- picture controls (Brightness, Sharpness...)
- settings
Other functions of the remote control are :
- switching between standby and operational mode.
- switching to "pause" (blanked picture, full power for immediate
restarting)
- direct access to all connected sources.
- variable adjustment speed : when pushing continuously on the
arrow keys or the picture keys, the adjustment will be executed
in an accelerated fashion.