Barco R9001070 - Manual (Page 72)

Random Access Adjustment Mode
5975696 BARCODATA 2100 140798 10-9
Random Access Adjustment Mode
10-9 5975696 BARCODATA 2100 140798
Options
Source number : The source number of a non-active source can be
changed to any other source number. This makes it possible to create
already a file for future source numbers.
Clamp pulse width : The width of the clamp pulse
Can be any value between 10 and 100. Change the value by pushing
the control disk to the left or to the right.
Clamp pulse delay : Clamping determines the black level of the signal.
The clamp pulse can be related to the leading edge of the sync pulse.
Can be any value between 2 and 512. Change the value by pushing
the control disk to the left or to the right.
Field polarity inverted : Default [No]
This function is used for interlaced images. Both rasters of the image
could be shifted in a wrong way (double lines are visilble in the image).
This can be corrected by inverting the field polarity to [Yes]
Use the ENTER key to toggle berween [No] and [Yes].
Vertical refresh [sync/async] : The way of updating the image
information on the LCD panels. For moving images, the vertical
refresh has to be done on a synchronous way, for still images,
asynchronous vertical refresh is possible.
Frame delay [On/Off] : default [On]
When [On] : there is a delay between input signal and displayed image
of 1 frame.
When [Off] : minimum delay between input signal and displayed
image. Only posible the 'Vertical refresh' is done synchronous and
the projector is mounted in a ceiling mounted configuration (installa-
tion menu)
Press EXIT to leave the Edit File Option menu.
EDIT FILE OPTIONS
SOURCE NUMBER 1
CLAMP PULSE WIDTH 44
CLAMP PULSE DELAY 24
FIELD POLARITY INVERTED [No]
VERTICAL REFRESH [Async]
FRAME DELAY [On]
Select with é or ê
<ENTER> to toggle
è or ç to change value
<EXIT> to return
Sync
pulse
Clamp
pulse
Clamp pulse
delay
Clamp
pulse
width
tr
a
ilin
g e
d
g
e
le
ading
e
d
ge
Options
Source number : The source number of a non-active source can be
changed to any other source number. This makes it possible to create
already a file for future source numbers.
Clamp pulse width : The width of the clamp pulse
Can be any value between 10 and 100. Change the value by pushing
the control disk to the left or to the right.
Clamp pulse delay : Clamping determines the black level of the signal.
The clamp pulse can be related to the leading edge of the sync pulse.
Can be any value between 2 and 512. Change the value by pushing
the control disk to the left or to the right.
Field polarity inverted : Default [No]
This function is used for interlaced images. Both rasters of the image
could be shifted in a wrong way (double lines are visilble in the image).
This can be corrected by inverting the field polarity to [Yes]
Use the ENTER key to toggle berween [No] and [Yes].
Vertical refresh [sync/async] : The way of updating the image
information on the LCD panels. For moving images, the vertical
refresh has to be done on a synchronous way, for still images,
asynchronous vertical refresh is possible.
Frame delay [On/Off] : default [On]
When [On] : there is a delay between input signal and displayed image
of 1 frame.
When [Off] : minimum delay between input signal and displayed
image. Only posible the 'Vertical refresh' is done synchronous and
the projector is mounted in a ceiling mounted configuration (installa-
tion menu)
Press EXIT to leave the Edit File Option menu.
EDIT FILE OPTIONS
SOURCE NUMBER 1
CLAMP PULSE WIDTH 44
CLAMP PULSE DELAY 24
FIELD POLARITY INVERTED [No]
VERTICAL REFRESH [Async]
FRAME DELAY [On]
Select with é or ê
<ENTER> to toggle
è or ç to change value
<EXIT> to return
Sync
pulse
Clamp
pulse
Clamp pulse
delay
Clamp
pulse
width
tr
a
ilin
g e
d
g
e
le
ading
e
d
ge