Waterpik WP-480 Installation Instructions - Manual (Page 3)

8. Attach your fixed mount showerhead or handheld showerhead bracket
to the threads of the Showerpik ® diverter just as the showerhead
had previously been installed on the shower pipe. If you own a fixed
mount or handheld showerhead with a Waterpik
® hidden pivot ball see
reinstallation instructions in next section.
NOTE: Showerhead attachments may vary from pictures above.
6. Hose Attachment to Diverter Valve:
Locate ridged hose connection end. Line up the notches on the diverter
valve with the raised areas inside the hose nut and insert then turn ¼ turn
to lock into place. (6A)
To Showerpik ® Power Handle:
Hand tighten hose end to the hose
inlet on the back of the Showerpik
®
power handle. (6B)
7. If showerhead or diverter valve
becomes loose during use, re-tighten
large nut as described in step 5.
6a
1 /
4
turn
6B
Tighten