Waterpik WP-480 Installation Instructions - Manual (Page 4)

2C
1. Place the large nut over the
Showerpik ® bracket threads with
the large nut threaded end facing you
(narrow end toward bracket). (1)
2. Thread pivot ball onto Showerpik ® bracket threads
and hand tighten clockwise to a snug fit. (2A) Use an
adjustable wrench or pliers to tighten an additional
¼–½ turn. (2B)
IMPORTANT: Do not over tighten.
NOTE: Some Waterpik ® showerheads have large nuts that do not leave
enough room on the Showerpik ® bracket threads for the pivot ball to be
attached. If this is the case, contact Water Pik, Inc. customer service at
800-525-2774 with your shower model number to obtain an extension to
the Showerpik
® bracket threads. (2C)
Re-Installing a waterpik ® hidden
pivot ball showerhead
2a
Tighten
2B
Tighten
1
large
Nut
Pivot Ball
Showerhead
Showerpik ® Thread
Extension
Oversized Large Nut
Showerpik ® Bracket
Threads