Western Digital WD TV User Manual - Manual (Page 182)

WD TV Media Player
User Manual
SETUP AND ADVANCED FEATURES – 177
Setup Navigation Buttons
Use these buttons on the remote control to navigate within and between the
Settings screens.
Audio/Video Output
Use the menus in this category to configure playback for audio and video files.
Video Output
Use this menu to select a video signal. After you finish making your selections, select
OK at the “Are you sure you want to change the video resolution?” prompt, then
press OK.
Composite
When using the standard RCA A/V cable (yellow, red, and white connectors) to
connect the media player, select Composite in the Video output screen.
Button Function
Up/Down arrows
• Select a menu
• Select a menu setting in an option
screen
OK Displays the option screen for the
selected menu
1. Press OK. A confirmation prompt appears.
2. Select OK, then press OK.
If you fail to select OK within 15 seconds, the new
setting will not be applied.
If your entertainment unit cannot support the
selected setting, no change is made and the
original setting is retained.
Applies the selected menu setting
Back Displays the previous menu screen