Western Digital WD TV User Manual - Manual (Page 28)

WD TV Media Player
User Manual
NETWORK SETUP – 23
Network Setup
The media player can be connected to the local area network using a wired or
wireless network connection for access to streaming video and online and offline
media content.
Ethernet Network (Wired) Setup
Follow these steps to automatically set up a wired network connection:
1. Press / to select your language in the setup wizard Welcome screen, then
press OK.
2. Plug an Ethernet cable into the Ethernet connector on the media player.
3. Plug the opposite end of the Ethernet cable directly into a LAN port on a router or
network switch.
4. The wizard begins automatic network connection. Select your time zone and
press OK.
Note: You can change the time zone/location where you set up the media player if you move to a
different area. See “Set Time & Country” on page 202.
5