Western Digital WD TV User Manual - Manual (Page 216)

WD TV Media Player
User Manual
SYSTEM MAINTENANCE – 211
Mochi UI
The New Firmware menu appears in the media player’s Home screen when updated
firmware becomes available, providing the option to automatically upgrade the
firmware.
Note: You must have Auto Detect New Firmware set to On to automatically upgrade firmware. See
“Auto Detect New Firmware” on page 207.
To update the firmware automatically:
1. Press HOME, then select New Firmware. Press OK.
2. Select Update device on the firmware update prompt, and then press OK. This
restarts the system. You can also select What’s New in This Update? to see
the changes.
3. After restarting, the system automatically enters firmware upgrade mode.
4. Once the update process finishes, the media player restarts. When the media
player restarts, the new firmware loads automatically.