Western Digital WD TV User Manual - Manual (Page 20)

WD TV Media Player
User Manual
GETTING STARTED – 15
Installation Procedure
The media player installation procedure is outlined below:
1. Connect the power cable. See “Step 1 - Connecting the Power Cable” on
page 15.
2. Connect the media player to your TV or entertainment unit. See “Step 2 -
Connecting the Media Player” on page 16. You can use HDMI (page 17), or
composite (page 18) connections.
3. Insert the batteries into the remote control.
4. Connect the USB device containing your media content (“Step 3 - Connecting a
USB Device (Optional)” on page 20) and/or establish a wired or wireless network
connection (“Step 4 - Connecting to Your Network” on page 22).
Step 1 - Connecting the Power Cable
1. If applicable, connect the power clip to the power cable plug.
The AC power adapter will vary, depending on your location. Some locations do
not require a power plug clip. Units sold in those locations will have a fixed power
plug.
2. Connect the power cable to the media player’s DC connector, and then plug the
opposite end into an AC power outlet. The media player powers up
automatically.