Western Digital My Book for Mac User Manual - Manual (Page 53)

MY BOOK FOR MAC
USER MANUAL
USING THE DRIVE WITH WINDOWS – 48
6. After password protecting or registering your drive, click Continue to close the
WD SmartWare initial Drive Settings screen and display the WD SmartWare Home
screen (Figure 17 on page 49).
This completes the getting started procedure after selecting Install WD SmartWare
and skipping the backup.
7. After password protecting or registering your drive, click Finish to close the drive
management initial Drive Settings screen.
This completes the getting started procedure after selecting Install Drive Settings.
In this case:
• Opening the WD SmartWare software displays the drive management Home
screen (see Figure 18 on page 50) with the Settings tab for performing all drive
management functions (see “Customizing Your Drive Settings” on page 41).
• Clicking the Settings tab displays the drive management Drive Settings screen
with a Preferences button that you can use to enable the WD SmartWare
Backup and Retrieve functions (see Figure 19 on page 50 and “Enabling the
Backup and Retrieve Functions” on page 53)
.
Figure 15. Initial Backup Screen