Western Digital My Book for Mac User Manual - Manual (Page 67)

MY BOOK FOR MAC
USER MANUAL
INSTALLING THE SES DRIVER – 62
d. Click Next:
5. When the installation completes, click Finish:
Installing on Windows Vista Computers
After connecting the drive as shown in Figure 4 on page 6, the Found New Hardware
screen displays.
Note: If Autoplay is enabled, two additional screens might appear at the same
time as the Found New Hardware screen. If they appear, close them.
You can use the Found New Hardware screen to install the SES driver either:
• Automatically, if your computer is connected to the Internet
• Manually, whether your computer is connected to the Internet or not