Western Digital My Book Duo User Manual User Manual
Page 68
MY BOOK DUO
USER MANUAL
MANAGING AND CUSTOMIZING THE DEVICE
– 63
5.
On the volume dialog:
a. If you want to change the name of a volume, type over the name in the Volume
Name box.
b. Read the warning about the loss of data when you change the device
configuration and select the I understand check box to signify that you accept
the risk and activate the Configure button.
c. Click Configure to begin the configuration change.
6.
After the configuration change completes, click OK to close the configuration
message display:
7.
Go to
http://support.wd.com
and see Knowledge Base answer ID 7 for information
about downloading and restoring the WD software and disk image.
Individual Drives
Volume name for each drive:
Important:
If you want to save any of the data that is on the device drives,
back it up to another device before continuing with the configuration.
Selecting the . . . option
Displays a volume dialog for specifying the . . .