Western Digital WD SmartWare User Manual - Manual (Page 32)

WD SMARTWARE SOFTWARE
USER MANUAL
INSTALLING THE SOFTWARE AND GETTING STARTED – 28
c. Click Next to display the initial Backup Screen. The initial Backup screen display
depends on the type of backup you selected at step 4 on page 26. (See Figure 6
on page 29.)
6. See “Backing Up Files” on page 42 and click either Enable Backup or Skip Backup
to enable or skip your first backup.
7. When you see the Backup Plan configuration complete message, click OK to close
it:
8. If you see the initial Drive Settings screen, proceed to “Getting Started—Your Initial
Drive Settings” on page 30.
Monthly On the selected day of the month, at the selected time:
a. Use the Every selection box to specify which occurrence of the
day that you want to run your backup—First, Second, Third,
Fourth, or Last.
b. Use the Day selection box to specify the day of the week that you
want to run your backup.
c. Use the at selection box to specify time of day that you want to
run your backup.
Selecting . . . Performs a backup . . .