Western Digital WD SmartWare User Manual - Manual (Page 49)

WD SMARTWARE SOFTWARE
USER MANUAL
BACKING UP FILES – 45
b. Click Advanced View to open the backup files selection box and verify that the
check boxes for all six categories of files are selected:
c. Select any cleared check boxes and then click Apply Changes to create a
custom backup plan and refresh the content gauges.
d. Click Enable Backup to begin backing up all categories of files on the backup
source device, at the specified backup frequency, and skip to step 10 on
page 47.
7. To backup selected categories of files on the selected backup source device:
a. Verify that the backup mode is category and that Ready to perform category
backup appears at the upper-left corner of the Backup screen.
If the backup mode is file and Ready to perform file backup appears there, then
click the Switch to Category Backup button and OK at the Switching Backup
Plan prompt.
b. Click Advanced View to open the backup files selection box: