Security settings category – Western Digital My Net AC1300 Router User Manual User Manual
Page 41
ADVANCED SETTINGS
37
MY NET AC1300 ROUTER
USER MANUAL
Security Settings Category
Purpose: Set up a firewall for this router to block specific incoming or outgoing traffic by
IP address and/or ports.
Name
Name to identify the firewall rule.
Source
Local network (LAN) or Internet (WAN).
Source IP Range
Range of IP addresses where the traffic initiates.
Protocol
Protocol that will be applied in the firewall rule. Available
options are All, TCP, UDP, and ICMP.
Action
From the drop-down list, select whether to allow or deny
incoming and outgoing traffic.
Destination
Local network (LAN) or Internet (WAN).
Destination IP Range
Range of IP addresses where the traffic is destined.
Port Range
Network traffic port range that will be applied in the firewall
rule.
Firewall Screen