Western Digital My Net AC1300 Router User Manual User Manual
Page 44
ADVANCED SETTINGS
40
MY NET AC1300 ROUTER
USER MANUAL
Routing Screen
Purpose: Define static routes to specific destinations.
Active
Select the check box to enable the routing entry.
Name
Enter a name for the routing entry.
Interface
Select the interface (WAN or LAN) for the routing entry.
Destination IP
IP address/network to which the data is sent.
Netmask
Enter a Netmask for the Destination IP to define the destination
network.
Gateway
Enter the Gateway IP address through which this router can be
reached. The Gateway IP should be reachable from your router.
FasTrack QoS Screen
Purpose: Configure QoS powered by WD FasTrack QoS technology. This engine improves
your media applications and online game experience by prioritizing your game traffic over
other network traffic, such as Web traffic. Use QoS rules to set the priority of your
applications.
Enable QoS
Enable the QoS application to prioritize different client
applications/traffic types over the Internet.
Uplink Speed
The uplink speed (in Kbps) at which data can be transferred
from the router to your ISP. The Auto (default) setting can
automatically detect the uplink speed. You can select other
values from the drop-down list or enter your own. QoS uses this
setting to determine how much bandwidth needs to be
reserved for prioritizing Internet traffic.
FasTrack Services
Select the types of media and gaming services you want to
prioritize.
Name
Name given to the service/client for the entry.
Priority
When creating a rule, select the precedence in which the
application or device sends data over the network compared to
other applications or devices. The default value is 1-Highest.
Type
From the drop-down list, select the option that specifies
whether the rule applies to a connected device or to an
application.
Detail
• For Device rules, specify the LAN IP and/or Remote IP
address(es) and protocol(s) for the rule.
• For Application rules, specify the Start and End port as well
as the protocol for the rule.
• The protocols available are TCP, UDP, and Both.
Delete icon
Click to delete the row.