Western Digital My Net AC1300 Router User Manual - Manual (Page 56)

PERFORMING ADVANCED TASKS
52 MY NET AC1300 ROUTER
USER MANUAL
Setting up the DHCP Server on the My Net Router
You can use your router as a DHCP server that assigns IP addresses to other components
of your network.
To set up a DHCP Server on your My Net AC1300 Router:
1. On the Advanced Setting screen, click the LAN icon.
2. Click the DHCP Server Settings tab:
3. Enable DHCP server (On by default) and click Save.
4. Configure DHCP IP Address Range.
Note: Note: The first part of the DHCP address range (192.168.1 by default) is
determined by the router's LAN IP address.
5. (Optional) Set a Local Domain Name.
6. Set the DHCP Lease Time (hours) and click Save.
7. Connect all of the client devices.