WORX WU706 115mm 710W Angle Grinder 240V - Manual (Page 11)

11
Intended use
Note: Before using the tool, read the instruction book carefully.
The machine is intended for cutting, roughing and brushing metal
and stone materials without using water. For cutting metal, a special
protection guard for cutting ( accessory) must be used.
Assembly and adjustment
MOUNTINg THE PROTECTIVE DEVICES
AUXILIARY HANDLE
For all work with the machine, the auxiliary handle (3) must be
mounted. Screw the auxiliary handle (3) on the right or left of the
machine head depending on the working method. (See Fig. A)
Do not make any alterations to the auxiliary handle.
Do not continue to use an auxiliary handle if it is damaged.
MOUNTINg THE gRINDINg TOOLS
Before any work on the machine itself, pull the mains plug.
grinding and cutting discs become very hot while working; do
not touch until they have cooled.
SPINDLE LOCK BUTTON
Clean the grinder spindle and all parts to be mounted. For clamping
and loosening the grinding tools, lock the grinder spindle (7) with the
spindle lock button (4).
Actuate the spindle lock button (4) only when the grinder spindle
is at a standstill!
1
1
A