WORX WU706 115mm 710W Angle Grinder 240V - Manual (Page 9)

9
Technical data
WU706L WU700
WU700.1
WU706
WU706.1
WU710
WU710.1
Rated voltage 110V~50Hz 220-240V~50/60Hz
Rated input power 710W
Rated no load
speed
12000/min
Protection class /II
Spindle thread M14 M10 M14 M14
Disc size 115mm 100mm 115mm 125mm
Disc bore 22.2mm 16mm 22.2mm 22.2mm
Machine weight 1.5kg
Noise information
A weighted sound pressure 85.0dB(A)
A weighted sound power 96.0dB(A)
K
PA
&K
WA
3.0dB(A)
Wear ear protection when sound pressure is over 80dB(A)
•
•
•
•
•
•
•
•
Vibration information
Vibration total values (triax vector sum) determined according to
EN 60745:
Typical weighted vibration
Vibration emission value
a
h
= 7.56m/s 2
Uncertainty K = 1.5m/s²
Warning: The vibration emission value during actual use of the
power tool can differ from the declared value depending on the ways
in which the tool is used dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and
in good condition.
The tightness of the grip on the handles and if any anti vibration
accessories are used.
And the tool is being used as intended by its design and these
instructions.
This tool may cause hand-arm vibration syndrome if its use is
not adequately managed.
Warning: To be accurate, an estimation of exposure level in the
actual conditions of use should also take account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the job. This may
•
•
•
•
•
•