Yamato Scientific RE540 Evaporators, Rotary - Manual (Page 15)

12
Installation/Assembly
8. Connecting the Evaporation and Receiving Flasks.
Insert the evaporation flask into the steam duct and hold by the flask clamp. In addition, connect the
receiving flask in the same way by the flask clamp to the cooling condenser or condenser
connector.
● Evaporation Flask
1. Turn the blue flask remover ring upward.
2. Connect the flask to the steam duct, and
hold by the evaporation flask clamp.
● Receiving Flask
Connect the flask to the cooling condenser or
the connecting condenser, and hold by the
flask clamp.
9. Insert the feed tube to the cooling condenser or condenser connector.
Assembly is now complete.
Flask Clamp Flask Clamp
Feed Tube