Yamato Scientific RE550 Evaporators, Rotary - Manual (Page 13)

11
Installation/Assembly
Assembling parts
8. Connecting the Evaporation and Receiving Flasks.
● Evaporation Flask
1. Turn the blue flask remover ring upward.
2. Connect the flask to the steam duct, and
attach the evaporation flask clamp.
● Receiving Flask
Connect the flask to the cooling condenser or
the connecting condenser, and attach the
flask clamp.
9. Insert the feed tube to the cooling condenser or condenser connector.
Assembly is now complete.
Flask Clamp Flask Clamp
Feed Tube