Yamato Scientific Hitech controller type Ⅳ - Manual (Page 14)

12
Note: In the tables below, hollow alphanumeric characters mean that they Note: In the tables below, hollow alphanumeric characters mean that they Note: In the tables below, hollow alphanumeric characters mean that they Note: In the tables below, hollow alphanumeric characters mean that they
are flashing on the corresponding display. are flashing on the corresponding display. are flashing on the corresponding display. are flashing on the corresponding display.
[Setting Program Number] [Setting Program Number] [Setting Program Number] [Setting Program Number]
Key
Operation
Main
Display Sub
Display Explanation
e.g., Push the
MODE key
and then
push either ▲
key or ▼ key Left 2 digits: Number of the existing
programs
Right 2 digits Remaining memory size (%)
e.g., e.g., Push ENTER
key, Activates Program input & Edit mode.
Main: Indicates Program No. 1.
Left 2 digits: Memory size of Program No. 1
Right 2 digits: Remaining memory size
Push ▲ key. Same as above.
The slob display shows that the memory size
of Program No. 2 is zero (O) or that Program
No. 2 has not been programmed.
[Setting Segment 1] [Setting Segment 1] [Setting Segment 1] [Setting Segment 1]
Key
Operation
Main
Display Sub
Display Explanation
Approx. 1 second later Push ENTER
key. Activates Program input mode for .
Requesting to input Ramp Time 1
of Segment 1. Push ▲ or ▼ key
when you want to switch Prom STEP to real
time. In this example, you are working on a
step operation so that you do not need to
change the indication.
Push ENTER
key. The main display stops flashing and keeps
lighting the indication, notifying that Ramp
Time 1 was set.
Approx. I second later
e. g Requesting to input the temperature of
Ramp Level 1