Yamato Scientific Hitech controller type Ⅳ - Manual (Page 18)

16
[Inputting and Setting End Segment] [Inputting and Setting End Segment] [Inputting and Setting End Segment] [Inputting and Setting End Segment]
Key
Operation
Main
Display Sub
Display Explanation
↓ ↓
↓
Push ENTER
key.
Push ▲ or ▼
key
Activates Input mode for Segment 5.
Requesting to input Ramp Time5
( ) of Segment 5.
Push ▲ or ▼ key to change to Program
Input mode for End Segment.
Push ENTER
key Requesting to turn on or off the fan or input
its revolution level.
Push ▲ or ▼
key. Push A or t key to change the setting. In
this example, turn off the fan.
Approx. 1 second later Push ENTER
key. Push ENTER key to accept the setting of
the fan, This completes all the settings for
Program No. 2. The displays return to their
initial indications of Program Input a Edit
mode.