Yamato Scientific Hitech controller type Ⅳ - Manual (Page 16)

14
[SettingSegment2] [SettingSegment2] [SettingSegment2] [SettingSegment2]
Key Operation
Main
Display Sub
Display Explanation
Approx. 1 second later
↓ ↓
Push ENTER
key, Activates Input mode for Segment 2.
Left 2 digits. Program number you are
working on.
Right 2 digits: Remaining memory size
Requesting to input Ramp Time 2
of Segment 2.
Input and preset the following parameters for this example in the same manner as
Segment 1.
:20 minutes
: 200℃
: 30 minutes
: ON
: 10
[Setting Segment 3]
Input and preset the following parameters in She same manner as above.
: StEP
: 150℃
: 0 minute (This is a segment of only the gradient operation.)
: OFF
: 10
You have finished setting Segment 2 and 3.