3D Robotics X8 Plus - Manual (Page 10)

8
Charging
Charge the battery before your first flight!
1
Connect the charger to the power adapter cable
and a wall outlet. Connect the red cable to the +
port and the black cable to the - port.
+
–
2
Set the charger to LiPo and 3A.
LiPo 3A
3
Connect the white connector to the 4S port, and
join the two yellow connectors together.
4S
4
Secure the battery inside the guard bag,
and charge until the status indicator
displays green.
Charging
Complete
Charger with power cable and
split-wire charging cable Charger settings
Flight battery charging wiring Charging in process
!
Flying with a low battery is a safety
risk and can render the battery
permanently unusable. Always fly
with a fully charged battery.
Charge the battery using a designated
LiPo balance charger only. Always
monitor the battery while charging.
Protect the battery from extreme
heat, extreme cold, puncturing, and
flammable surfaces. Always transport,
charge, and store the battery in the
guard bag.
Inspect the battery for damage before
and after flying. If you observe any
swelling of the package or the battery
ceases to function, do not use the
battery; locate your local battery
recycling center, and dispose of the
battery. In the US and Canada, visit
call2recycle.org to find a location.
Do not dispose of the battery in the
trash.
Safety