3D Robotics X8 Plus - Manual (Page 28)

26
Landing
1
Press and hold the safety button until it
blinks red. The motors are now inactive,
and the X8 is safe to handle. 2
To disarm the motors, hold the left stick down/left
until the motors stop.
Disarm
For manual landing in standard or loiter mode:
Motors inactive, safe to handle
Motors active, deactivate before
handling
Controller left stick: disarming position Safety button indicators
!
Do not handle the propellers or pick up the copter while the safety button is
active (solid red). Remember to disconnect the battery before turning off the
controller when powering off.
If you end your flight using the Ch 7 land command or RTL, the X8 will
disarm automatically; wait for the motors to stop, and proceed to powering
off. Attempting to disarm the X8 in either land or RTL can cause the cause
the copter to flip.