3D Robotics RTF Y6 - Manual (Page 2)

+
–
Attach propellers
Remove the rings from the propeller
packages. Select the ring with the
smaller internal diameter, and insert
it into the back of the propeller hub.
Remove the nuts and washers from
the motors. Add SFP propellers to the
the front-left and back-right motors
and SF propellers to the front-right and
back-left motors with the writing on the
propellers facing towards the sky.
Charge battery
Place the washer over the propeller, and
secure the nut tightly on top. Always
ensure that the propellers are fastened
tightly to the motors before flying.
LiPo 3A
Connect the charger to the power
adapter cable and a wall outlet.
Connect the red cable to the + port
and the black cable to the - port.
Set the charger to LiPo and 3A.
red
black
SF
SFP
SF
SFP
SF
SFP