Battery safety – 3D Robotics RTF Y6 User Manual
Page 3
4S
Charging
Complete
Connect the white connector to
the 4S port. Join the two yellow
connectors together.
Secure battery inside the guard
bag while charging. Charge until
the status indicator displays green.
red
green
guard bag
Protect battery from extreme heat, extreme cold, puncturing,
and flammable surfaces. Always transport, charge, and store
battery in the guard bag.
Charge battery using a designated LiPo balance charger only.
Always monitor battery while charging.
Flying with a low battery is a safety risk and can render battery
unusable. Always discontinue use when you receive a low
battery notification, and always fly with a fully charged battery.
Inspect battery for damage before takeoff and after landing.
If you observe any swelling of the package or battery ceases
to function, locate your local battery recycling center to dispose
of battery. In the US and Canada, visit
to
find a location. Do not dispose of battery in the trash.
!
Battery safety