Chapter 4, Using the him, Initial him operation on new drive powerup – Rockwell Automation 20-HIM-C6S PowerFlex (Human Interface Module) User Manual

Page 31: Chapter

Advertising
background image

Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013

31

Chapter

4

Using the HIM

This chapter provides information about using the HIM.

For a list of parameters, see

Appendix B

, HIM Parameters.

Initial HIM Operation on New
Drive Powerup

When powering up a new drive for the first time, the HIM runs through an
initial operating routine that does the following:

Prompts you to select a language.

Initiates a drive start-up routine.

Initiates a port verification check (only for PowerFlex 750-Series drives). If
a port conflict is detected, see

page 60

for information to resolve it.

Topic

Page

Initial HIM Operation on New Drive Powerup

31

Selecting Display Contrast

32

Setting the Date/Time for PowerFlex 750-Series Drives

33

Creating a User-Defined Drive/Peripheral Name

35

Customizing the Process Screen

36

Resetting the Drive/Peripherals

38

Setting Factory Defaults

38

Setting Display Flashing for Fault Indication

40

Setting Display Flashing for Alarm Indication

41

Viewing/Editing Drive or Peripheral Parameters

42

Viewing/Clearing Drive Faults or Alarms

44

Viewing Peripheral Diagnostic Items

45

Viewing/Clearing Peripheral Events

46

Checking Drive and Peripheral Firmware Revisions

47

Using the CopyCat Function

48

Changing PowerFlex 750-Series Drive Parameter Associations

52

Linking Parameters in PowerFlex 700/700S Drives

55

Using a Password

57

Initiating PowerFlex 750-Series Drive Port Verification

60

Changing Language for the Display Text

62

Updating the HIM Firmware or Language

63

Advertising
This manual is related to the following products: