Rockwell Automation 20-HIM-C6S PowerFlex (Human Interface Module) - Manual (Page 70)

70 Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013
Appendix C History of Changes
20HIM-UM001B-EN-P,
October 2010
20HIM-UM001A-EN-P,
January 2009
Topic
In Chapter 2, added new subsection ‘PowerFlex 750-Series IP54, NEMA/UL Type 12 Drives’ with instructions to install
the HIM.
In Chapter 3:
• In the ‘Single Function Keys’ subsection, added footnote to the single function keys Folders and Controls explaining
that these keys are temporarily inactive during drive Start Up.
• In the ‘Soft Key Labels’ subsection, added new RESET soft key label to the table.
• In the ‘Folder Screens’ subsection, added new Param Access Level menu item to the DEV PARAM folder screen.
In Chapter 4:
• In the ‘Setting the Date/Time for the Drive (only PowerFlex 750-Series Drives)’ subsection, revised the Date/Time
and Date/Time Set Edit Mode screens.
• In the ‘Changing Displayed Items, Adding a Scale Factor or Customizing Text’ subsection, revised the Process Display
1 screen.
• In the ‘Direct Parameter Access’ subsection, revised the Edit Parameter pop-up box, added a TIP to step 7.
• In the ‘Alternate Linear List’ subsection, added a TIP to step 9.
• In the ‘Using the CopyCat Function’ section, added an Important statement describing the limitations of the CopyCat
feature with DeviceLogix functions in PowerFlex 750-Series drives.
• In the ‘Using Individual Screen Entry Method’ subsection, revised Port Number Selection and Target Parameter
Selection pop-up boxes.
Topic
This was the first release of this manual.