Rockwell Automation 20-COMM PowerFlex 7-Class DPI (Drive Peripheral Interface) Network Communication Adapter - Manual (Page 4)

Step 6 Connect one end of the network cable to the network. Make sure to use
the proper cable for the network. See the adapter User Manual’s “Related
Documentation” section for appropriate publication(s).
Step 7 Route the other end of the network cable to the outside of the drive, and
connect the cable to the adapter using the adapter’s mating socket or
terminal block. For complete wiring details, see the adapter User Manual.
Important: Make sure to properly route, wire, and ground the cable.
Always separate the communications wiring from the power
and motor wiring. For more information, see Wiring and
Grounding Guidelines for PWM AC Drives.
Step 8 Read the adapter User Manual for information to configure and
determine how to apply the network to the host product.
www.rockwellautomation.com
Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
Europe/Middle East/Africa: Rockwell Automation, Vorstlaan/Boulevard du Souverain 36, 1170 Brussels, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640
Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846
Power, Control and Information Solutions Headquarters
U.S. Allen-Bradley Drives Technical Support
Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, Email: [email protected], Online: www.ab.com/support/abdrives
Publication 20COMM-IN004A-EN-P –January, 2008 P/N 376902-P01
Copyright © 2008 Rockwell Automation, Inc. All rights reserved. Printed in USA.