Rockwell Automation 20D-DL2-CL3 DriveLogix Controller Compact I/O Cable - Manual (Page 10)

10 Compact I/O Cable for DriveLogix™5730 Controller
Publication 20D-IN008B-EN-P - August 2004
Step 3: Installing the Controller End of the Cable
E
E
E
E
A
B
C
D
A D
B
=
Use cable tie to anchor cable
to slots on this flange for
strain relief
Task Description
Remove screws
Install clips on controller end of cable
Plug controller end of cable into mating
connector on the Logix Expansion Board
Install and tighten screws (7-10 lb.-in.)
Route and secure cable
A
B
C
D
E
Step 4: Replacing the Cover and Control Cassette
The procedure for replacing the cover and control cassette is the reverse of removing these
components. Refer to Step 2: Removing the Control Cassette from the Drive and the Covers
from the Cassette on page 9.