Rockwell Automation 20Y PowerFlex Active Front End in IP20 2500 MCC Style Encl. Fr. 10 Bus Splice Kit - Manual (Page 10)

PowerFlex Active Front End in IP20 2500 MCC Style Enclosure Frame 10 Bus Splice Kit
Publication 20Y-IN003A-EN-P - September 2014 PN-261790
Copyright © 2014 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Allen-Bradley, Rockwell Software, Rockwell Automation, and TechConnect are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
U.S. Allen-Bradley Drives Technical Support - Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, E-mail: [email protected]
Online: www.ab.com/support/abdrives
Step 6: Connect the MCC bus and PE ground splices in the AFE enclosure to the bus
and ground bars, respectively, in the other enclosure.
a. Assemble the MCC bus splices to the horizontal bus bars in the
other enclosure using the supplied hardware.
Torque to 300 ±10% in
•lb (33.9 ±10% N•M).
b. Assemble the PE ground splices to the top and bottom PE ground
bus bar connections in the other enclosure using the supplied
hardware.
Torque to 65.0 ±10% in
•lb (7.3 ±10% N•M).
Adjacent Enclosure (Front View)
with Bus Bars to be Connected
to AFE Left-side Splices
AFE Enclosure
(Front View)