Step 4: reinstalling the inverter cassette, Step 5: documenting the change, Step 6: reinstalling the drive cover – Rockwell Automation 20L PowerFlex 700L Frame 2 DC Bus Bar Conversion Kit User Manual
Page 7
PowerFlex® 700L Frame 2 DC Bus Bar Conversion Kit SK-L1-DCBS1-F2
7
3. Assemble the flat dielectric support to the top of the drive. Align the flat
dielectric support’s L-shaped clearance slots over the DC- and DC+ bus
bars, place the support on the drive, and fasten the support to the drive
using the four (4) M4 x 12 mm (0.47 in.) long SEMS screws. Tighten to
the torque shown in the drawing.
Step 4: Reinstalling the
Inverter Cassette
Plug the cable connectors into the inverter cassette and reinstall the cassette
in the drive.
Step 5: Documenting the
Change
Record the change on the Field Installed Option label. Use a marker to write
in the kit catalog number (SK-L1-DCBS1-F2).
Step 6: Reinstalling the
Drive Cover
Reinstall the cover onto the drive.
FIELD INSTALLED OPTIONS
Firmware
#:
Date
Firmware
20-HIM
28-IO-
20-COMM-
20B_-DB1-
HIM
I/O
COM Module
Internal Dynamic Brake
#:
Date
FRONT VIEW
(Cover Removed)
Drive Data
Nameplate