Rockwell Automation 20P PowerFlex DC Drive - Frame C Field Dual Diode Module User Manual

Powerflex, Dc drive - frame c field dual diode module

Advertising
background image

Installation Instructions

PowerFlex

®

DC Drive - Frame C Field Dual

Diode Module

What This Kit Includes

Field Dual Diode module

Two screws and washers

Thermal grease

Static strap

Important: It is highly recommended that the Field circuit board and Field

SCR module be replaced when replacing the Field Dual Diode
module. The Field circuit board and Field SCR module are sold
as separate spare part kits.

Tools That You Need

Phillips

®

screwdriver

Flathead screwdriver

Phillips

®

is a registered trademark of Phillips Screw Company.

!

ATTENTION: Only qualified personnel familiar with DC
drives and associated machinery should plan or implement the
installation, start-up and subsequent maintenance of the system.
Failure to comply may result in personal injury and/or equipment
damage.

!

ATTENTION: To avoid an electric shock hazard, ensure that
all power to the drive has been removed before performing the
following.

!

ATTENTION: This drive contains ESD (Electrostatic
Discharge) sensitive parts and assemblies. Static control
precautions are required when installing, testing, servicing or
repairing this assembly. Component damage may result if ESD
control procedures are not followed. If you are not familiar with
static control procedures, reference A-B publication 8000-4.5.2,
“Guarding Against Electrostatic Damage” or any other
applicable ESD protection handbook.

Advertising