Related documentation – Rockwell Automation 20P PowerFlex DC Drive - Frame D SCR Module Leg Assembly User Manual
Page 9
9
Step 5: Close the Control
Panel, Install the Protective
Cover and Document the
Change
1. Close the control panel, replace the DPI cable (if necessary), and install the
protective cover in the reverse order of removal as detailed in Step 2:
Remove the Protective Cover and Open the Control Panel on page 2
.
2. Record the installation of the new SCR module leg assemblies and date of
installation on the Field Installed Option label on the side of the drive (as
shown below).
Related Documentation
Allen-Bradley publications are available on the internet at
www.rockwellautomation.com/literature
.
For . . .
Read this document
Publication
Number
In depth information regarding the
operation of PowerFlex Digital DC drives
User Manual - PowerFlex Digital DC Drives 20P-UM001…