Rockwell Automation 700DC-P Industrial Control Relay and Accessory - Manual (Page 3)

18 - 22 lb-in
(2.0 - 2.5 N-m)
18 - 22 lb-in
(2.0 - 2.5 N-m)
AC Coil DC Coil
CLICK
CLICK
Adder Deck Installation
Install top
cover. 6
Install terminal shield. 7
Install second deck
as required.
700-PB_ _
or
700-PKB_ _
1
Install third deck
as required.
700-PC_ _
or
700-PKC_ _
3
Install contact
cartridges
as required. 2
Install contact
cartridges
as required.
4
Install cross bar
with longer drive
screw.
5
Coil Replacement
14 - 18 lb-in
(1.6 - 2.0 N-m)
8 - 12 lb-in
(.9 - 1.4 N-m)
8 -12 lb-in
(.9 -1.4 N-m)
(3)
8 - 12 lb-in
(.9 - 1.4 N-m)
Latch Attachment Installation
(Single Deck Relays Only)
Push to latch
Push to unlatch
CLICK
D.C.
D.C.
Mechanical tie to
Single-Deck Relay
thru Central Drive
Screw K
K3
K4
K1
K2
D2Y D1Y
D2X D1X
To operate unlatch coil, apply DC to K3-D2X
Arc suppressors (diodes or RC) are the only circuits that can
be connected directly across the unlatch coil, K3-K4
A D.C. latch unit can be added to anyType P or PK single deck
AC or DC relay.
Remove crossbar
screw. 1
8 - 12 lb-in
(.9 - 1.4 N-m)
8 - 12 lb-in
(.9 - 1.4 N-m)
14 - 20 lb-in
(1.6 - 2.3 Nm)
Install Latch
Attachment. 2
2
FOR DC LATCH UNITS
18 - 22 lb-in
(2.0 - 2.5 N-m)
8 - 12 lb-in
(.9 - 1.4 N-m)
18 - 22 lb-in
(2.0 - 2.5 N-m)
18 - 22 lb-in
(2.0 - 2.5 N-m)
18 - 22 lb-in
(2.0 - 2.5 N-m)
NOTE: For test putposes only. Do not engage
the latch and unlatch at the same time.
B-vertical.ai
1 2 3 4 5 6 7 8
A
B
C
D
E
F
G
H
CONFIDENTIAL AND PROPRIETARY INFORMATION. THIS DOCUMENT
CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF
ROCKWELL AUTOMATION, INC. AND MAY NOT BE USED, COPIED OR
DISCLOSED TO OTHERS, EXCEPT WITH THE AUTHORIZED WRITTEN
PERMISSION OF ROCKWELL AUTOMATION, INC.
BULLETIN 700P INSTALLATION
INSTRUCTION SHEET
10000005242
Sheet
Size Ver
Of 4 3
B 00
Dr. Date - - - - - - - - - - - -