Rockwell Automation 281A ArmorStart with ArmorPoint Backplane - Getting Started User Manual
Page 2
Advertising
2
Publication 280A-QS001C-EN-P - July 2006
Installation
The ArmorStart Distributed Motor Controller is convection cooled.
Operating temperature must be kept between -20…40°C (-4…104°F).
Dimensions
Dimensions are shown in millimeters (inches). Dimensions are not intended
to be used for manufacturing purposes. All dimensions are subject to
change.
Figure 1 Dimensions for IP67/NEMA Type 4 with Conduit Entrance
Advertising
This manual is related to the following products: