Rockwell Automation 281A ArmorStart with ArmorPoint Backplane - Getting Started - Manual (Page 24)

24
Publication 280A-QS001C-EN-P - July 2006
Bulletin 280/281 Parameters
Table 7 Starter Display and Parameter Settings
Table 8 FLA Setting Ranges and Default Values (with indicated setting precision)
Parameter Name String Path (hex) Min Max Dflt Type Value
Starter Display
101 Phase A Current 002C – 01 – 08 0 32767 — INT xxx.x Amps
102 Phase B Current 002C – 01 – 09 0 32767 — INT xxx.x Amps
103 Phase C Current 002C – 01 – 0A 0 32767 — INT xxx.x Amps
104 Average Current 002C – 01 – 05 0 32767 — INT xxx.x Amps
105 % Therm Utilized 002C – 01 – 07 0 100 — USINT xxx %
Starter Settings
106 FLA Setting 002C – 01 – 03 See Table 8 below Min I INT xxx.x Amps
107 OL Trip Class 002C – 01 – 04 0 3 1 BYTE
1 = 10
2 = 15
3 = 20
108 OL Reset Level 0029 – 01 – 131 0 100 75 BYTE xxx %
FLA Current Range (A)
Default Value
Minimum Value Maximum Value
0.24 1.2 0.24
0.5 2.5 0.5
1.1 5.5 1.1
3.2 16.0 3.2