Rockwell Automation 193-EE Bul 193 E1 PLUS Overload Relay Application and Installation User Manual

Cat 193-ee_f, -ee_g, -ee_h)

Advertising
background image

Supplied - Fourni - Im Lieferumfang enthalten - Incluye - Fornecido - Fornito -

-

1

193-EE _ F

193-EE _ G

193-EE _ H

M12 x 40

M12 Washer

M12 Nut

M10 x 30

M10 Washer

M10 Nut

M8 x 25

M8 Washer

M8 Nut

x 3

x 3

x 3

x 3

x 3

x 3

x 3

x 3

x 3

Supplied with Contactor
Fourni avec un contacteur
Mit Schütz geliefert
Incluido con el interruptor
automático
Fornecido com contato
Fornito con il contattore

Bulletin 193 E1 PLUS Overload Relay Application and Installation
Application et installation du relais de surcharge Famille 193 E1 PLUS
Überlastrelais Bulletin 193 E1 PLUS, Anwendung und Installation
Aplicación e instalación del relé de sobrecarga, Boletín 193 E1 PLUS
Boletim 193 E1 PLUS Aplicação e Instalação do Relé de Sobrecarga
Applicazione ed installazione dei relè termici Bollettino 193 E1 PLUS

(Cat 193-EE_F, -EE_G, -EE_H)

193 E1 PLUS

Bulletin 193 E1 PLUS

Installation
Instalación
Instalação
Installazione

PN-39921
DIR 10000044940 (Version 03)

Printed in U.S.A.

WARNING

AVERTISSEMENT

WARNUNG

AVVERTENZA

ATENÇÃO

ADVERTENCIA

To prevent electrical shock, disconnect from power source before installing or servicing. Install in suitable enclosure. Keep free
from contaminants. (Follow NFPA70E requirements)

Avant le montage et la mise en service, couper l'alimentation secteur pour éviter toute décharge. Prévoir une mise en coffret ou
armoire appropriée. Protéger le produit contre les environnements agressifs. (Vous devez respecter la norme NFPA70E).

Vor Installations- oder Servicearbeiten Stromversorgung zur Vermeidung von elektrischen Unfällen trennen. Die Geräte müssen in
einem passenden Gehäuse eingebaut und gegen Verschmutzung geschützt werden. (Befolgen Sie die Anforderungen nach NFPA70E).

Desconéctese de la corriente eléctrica, antes de la instalación o del servicio, a fin de impedir sacudidas eléctricas. Instálelo en una
caja apropiada. Manténgalo libre de contaminantes. (Cumpla con los requisitos NFPA70E)

Para evitar choques, desconectar da corrente elétrica antes de fazer a instalação ou a manutenção. Instalar em caixa apropriada.
Manter livre de contaminantes. (Cumpra as exigências da norma NFPA70E)

Per prevenire infortuni, togliere tensione prima dell'installazione o manutenzione. Installare in custodia idonea. Tenere lontano da
contaminanti. (Seguire i requisiti NFPA70E)

1

2

9 N·m (80 lb-in)

22 N·m (195 lb-in)

100-D95E / -D180E
100-D115, -D140, -D180

100-D210 / D420

100-D95, -D110

43 N·m (380 lb-in)

100-D630 / D860

68 N·m (600 lb-in)

Advertising