Rockwell Automation 500LC Control Module Kits - Manual

Instructions
Publication 500LC–IN005A–EN–P May 2005
Control Module Kits
500LC–47CM*,
500LC–48CM*, 500LC–49SS* for
Bulletin 500LC Lighting Contactors
Use these instructions to add optional control modules onto Bulletin 500LC
Lighting Contactors.
Control
Module
2–Wire Control
500LC–47CM*
3–Wire Control
500LC–48CM*
Form 3 Control
500LC–49SS*
Module
Voltage
Kit No. Kit No. Kit No.
12V AC/DC 500LC–47CM12 500LC–48CM12 500LC–49SS12
24V AC/DC 500LC–47CM24 500LC–48CM24 500LC–49SS24
120V AC 500LC–47CM120 500LC–48CM120 500LC–49SS120
240 / 277V AC 500LC–47CM240 500LC–48CM240 500LC–49SS240
These control modules can be field installed on the bottom or right side
of the lighting contactor depending on the number of contactor poles.
Each module is suitable only for the control voltage marked on it.
Table A – Ratings for Control Modules
Control 500LC–47CM* 500LC–48CM* 500LC–49SS* Control
Module AC DC AC DC AC DC
12V AC/DC 0.60 VA 0.32 Watt 0.34 VA 0.36 Watt 0.68 VA 0.70 Watt
24V AC/DC 0.85 VA 0.36 Watt 0.34 VA 0.38 Watt 0.70 VA 0.72 Watt
120V AC 1.90 VA — 1.60 VA — 3.70 VA —
240 / 277V AC 4.00 VA — 2.50 VA — 6.00 VA —
Figure 1 Bottom mounting Figure 2 Side mounting
Use outer holes in
legs for mounting.
Use inner
holes for
mounting.
Control
Module
Control
Module