Rockwell Automation 445L GuardShield Safe 2 and Safe 2 PAC Safety Light Curtains User Manual - Manual (Page 28)

GuardShield™ Safe 2 Safety Light Curtain User Manual
26
R
Original instructions
Certificate
DOC
Document Control Number: SEN-0391-A-EN 1 / 2
EC Declaration of Conformity
The undersigned, representing the manufacturer and the authorised representative established within the Community
Rockwell Automation, Inc.
1201 South Second Street
Milwaukee, WI 53204
USA
Rockwell Automation BV
Rivium 1e Straat, 23
2209 LE Capelle aan den IJssel
Netherlands
Herewith declare that the Products: Safe2 Safety Light Curtains
Product identification (brand and catalogue
number/part number): Allen-Bradley / GuardShield 445L Series
(reference the attached list of catalogue numbers)
Product Safety Function Safe2 safety light curtains are Type 2 active opto-electronic protective devices (AOPD) with
resolutions of 30mm/PAC. They are cascadeable, and can be used in applications up to
Safety Category 2 (EN 954-1)/ SIL2/SIL CL2 (EN 61508 / EN 62061) and PL d (EN ISO
13849-1).
are in conformity with the essential requirements of the following EC Directive(s) when installed in accordance with the installation instructions
contained in the product documentation:
98/37/EC and 2006/42/EC
Machinery Directive
2004/108/EC EMC Directive
and that the standards and/or technical specifications referenced below have been applied:
EN 61496-1:2004 + A1:2008
Safety of machinery – Electro-sensitive protective equipment – Part 1: General requirements and
tests
IEC 61496-2:2006 Safety of machinery – Electro-sensitive protective equipment – Part 2: Particular requirements
for equipment using active opto-electronic protective devices (AOPD’s)
EN ISO 13849-1:2008 Safety of machinery – Safety-related parts of control systems – Part 1: General principles for
design
EN 61508 Parts 1-7:1998-2000 Functional safety of electrical/electronic/programmable electronic safety-related systems
EN 954-1:1997 Safety of machinery – Safety related parts of control systems – Part 1: General principles for
design
EN 50178:1997 Electronic equipment for use in power installations
EN 62061:2005 Safety of machinery – Functional safety of safety-related electrical, electronic and programmable
electronic control systems
EN 60204-1:2006 Safety of machinery – Electrical equipment of machines – General requirements
EN 61000-6-4:2007 Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for
industrial environments (Class A)
EN 61000-6-2:2005 Electromagnetic Compatibility (EMC) – Part 6-2: Generic standards – Immunity for
industrial environments
Conformance of a type sample belonging to the above mentioned product family with the regulations from the EC Machinery Directive has been
certified by:
TÜV Rheinland Product Safety GmbH
Am Grauen Stein
D-51105 Köln, Germany
EC Type Examination
Registration No: BB 600022682 0001
Report No: 968/M204.02/09
Manufacturer: Authorised Representative in the Community:
Signature
Signature
Name: Daniel L. Nachtigall Name: Viktor Schiffer
Position: Supv – Product Certification Engineering Position: Engineering Manager
Date: 03-Dec-2009 Date: 08-Dec-2009