BlueAnt Voice Control Q1 User Manual

Making calls, Use your voice to control the q1, Let’s get started

Advertising
background image

Making Calls

Click the

button and wait for the Q1 to ask you

to “Say a Command”. Then say one of the voice

commands:

>

Say

Redial

to redial the last number you called.

>

Say

Call Back

to return the last call you received.

>

Say

Phone Commands

to use phone voice dialling

(if your phone supports it).

>

Say

Call Speed Dial

followed by

1

to

8

.

Use your Voice

to Control the Q1

When you want to

do something:

1. Click the

button

and wait for the

Q1 to ask you to

“Say a Command”.

2. Say one of the

voice commands

loudly and clearly.

To learn the voice commands, say

What Can I Say?

Let’s Get Started

1. Put the Q1 in your ear.

2. Hold down the

button until you hear

the welcome message

(about 3 seconds).

3. Follow the voice

prompts to pair the Q1

with your phone.

That’s it! You’re ready to go.

Tip:

The code for the Q1 is

0000

(four zeros).

Quick Start Guide

English

Taking Calls

You can answer the call with your

voice: wait for the prompt to fi nish

and then say

Answer

or

Ignore

.

If you don’t want to wait for the

prompt, or you are in a noisy place:

>

Click the

button once to accept the call.

>

Double click the

button to reject the call.

To End a Call

Click the

button.

WARNING:

Prolonged use at high volumes can cause noise induced hearing loss.

Vol -

Vol +

button

(BlueAnt button)

Microphones

Main Voice Commands

>

Am I Connected?

>

Answer

>

Call Back

>

Call Information

>

Call Speed Dial 1-8

>

Cancel

>

Check Battery

>

Ignore

>

Pair Me

Main Voice Commands

>

Phone Commands

>

Redial

>

Settings Menu

>

Switch Headset Off

>

Teach Me

>

What Can I Say?

Tip

: Use the

Teach Me

command to learn about your

Q1, or say

What Can I Say?

to hear a list of all the

voice commands.

Pair

Me

Am I

Connected?

3

2

1

4

5

6

A2DP Audio Streaming

The Q1 supports A2DP audio streaming: if your

phone supports A2DP streaming you can play music,

podcasts or any other audio and it will automatically

be streamed to the Q1.

You can also use this feature to hear turn-by-turn

direction information from a GPS application on your

phone. Simply start the GPS application and the

audio will automatically transfer to your headset.

The audio will automatically pause if you make or

receive a phone call, and resume when the call ends.

7

Problems?

If you are having trouble, you can

reset the Q1

and start again:

1. Make sure the Q1

is on and is not

connected to any phones.

2. Click

Vol +

,

Vol -

and the

button

together.

3. You will hear the welcome message.

Follow the voice prompts to

pair the Q1 with your phone.

Terms and Conditions

By using this product you are agreeing to BlueAnt’s terms and

conditions, available at

www.blueantwireless.com

.

In order to activate your

full warranty coverage

, please

register your product online at

www.blueantwireless.com

.

Warning:

All BlueAnt headsets are designed to reach volumes

of up 100 decibels. Prolonged use at high volumes may affect

your hearing capacity. Using for extensive time periods may

result in noise induced hearing loss (NIHL).
The Bluetooth

®

word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of such

marks by BlueAnt Wireless is under license.
© 2009 BlueAnt Wireless. All Rights Reserved.

Help and Support

This guide is just to get you started with your Q1.
If you are having trouble getting the Q1 to work, visit

docs.blueantwireless.com

to download the user

guide, which has full details of all the Q1’s features

and functions.

Please call us

before returning the Q1 to a store and

we will help you through any diffi culty you may have.

>

In North America call

1 866 891 3032

.

>

In other countries please see

www.blueantwireless.com

for your local support

number.

Pairing Another Phone

The Q1 automatically

goes into pairing

mode the fi rst time

you switch it on.
You only need to pair your phone once, but if you

want to pair another phone later on, just say

Pair Me

.

>

The Q1 can store pairing information for up to 8

Bluetooth

®

devices.

>

Up to 2 devices can be connected at the same

time and you can answer whichever one rings

(multipoint).

In a Noisy Environment?

The Q1 has been designed to reduce background

noise and wind interference.
If you fi nd yourself in a very noisy or windy

environment, double click the

button during a

call to switch between

standard

and

maximum noise

reduction settings

.

Switching On and Off

To switch the

Q1 on or off

hold down

the

button

for about 3

seconds.

You can also switch

off using this voice

command:

Switch

Headset

Off

Charging

Your Q1 has been given an

initial charge to get started, but in future you need to

charge it for up to 2.5 hours.
If the

button fl ashes red when you switch the Q1

on, the battery is low. Use the supplied AC adaptor

and USB cable to charge the Q1.

>

During charging, the

fl ashes red.

>

When the light goes blue, the charge is complete.

>

For safety reasons, the Q1 automatically turns off

during charging.

8

Upgrades

To enhance your experience, we are continually

improving the Q1 software.

From time to time we will make feature

enhancements available on our website for you to

download and apply to your Q1.

Go to

q1.blueantwireless.com

to get the latest

software for your Q1.

9

10

11

12

13

14

15

Advertising